MPPT Solar Regulator 10A 100V 12/24v auto sensing, Solar Charge Controller

Product Numbers: SCC-T1210

Product description:MPPT Solar Regulator 10A 100V 12/24v auto sensing, Solar Charge Controller


Max. PV input voltage: 100VDC,

Max. PV input power: 12v system 130W, 24V system 260W.

Thank you for selecting the Tracer controller which represents advanced technology of our company. The features are listed below:

·12V / 24V auto recognition.

·Advanced maximum power point tracking technology to optimize using the solar system.

·Peak conversion efficiency of 97 %, high Tracking efficiency of 99%.

·Very fast sweeping of the entire I-V curve, several seconds tracking speed.

·Widely used, automatic recognize day/night.

·Timer function with 1-15 hours option for street light.

·Unique dual timer function, enhance the flexibility of street light system.

·Sealed, Gel and Flooded battery option.

·Adopting temperature compensation and correcting the charging and discharging parameters automatically, improving the battery lifetime.

·Electronic protection: over charging, over discharging, overload, short circuit.

·Reverse protection: any combination of solar module and battery, without causing damage to any component.

·Excellent thermal design and nature air cooling.

·RJ45 interface with remote meter, convenient to check operating parameters of controllers. (optional: if you need remote meter, please send message to you separately.)

The Tracer series controller is for off-grid solar system and control the charging and discharging of the battery, especially suitable for the street light system. The controller features a smart tracking algorithm inside that maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the low voltage disconnect function (LVD) will prevent the battery from over discharging.

The Tracer controller charging process has been optimized for long battery life and improved system performance. The comprehensive self-diagnostics and electronic protection functions can prevent damage from installation mistakes or system faults. In addition, the Tracer controller has a RJ45 interface to allow communication with a meter for remote monitoring(optional).


Technical Parameter:

Rated current 10A

Max. PV Voc 100VDC

Rated voltage 12V/24V Auto

Rated input power 12V system: 120W; 24Vsystem: 240W

Charge circuit voltage drop <=0.26V

Charge circuit voltage drop <=0.15V

Dimension 156 x 97 x 68 mm

Mount hole 147 x 60 mm

Terminals 4 mm2

Mounting hole size Φ5

Working temperature  -35 - +55