wind turbine 2000w 3 phase three blades for wind power to supply the electricity

Product Numbers: MHY-2KW

Product description:wind turbine 2000w 3 phase three blades for wind power to supply the electricity



Under the wind speed of 0m/s ~ 3m/s, the turbine blade remain static ,and the angle X1 formed between the blade and turbine plane is B° (X1= B°);under this angle ,the blade is most easily to be started up. As long as the wind speed reached 3m/s, the blades will begin to rotate, during the rotation, the outermost edge of the blade will be driven by the centrifugal force generated by the rotation of the blade to tilt toward the turbine plane, the aforementioned angle X1 will decrease until 0° when the blade is in parallel with the turbine plane; at this angle ,the turbine has nearly reached its rated output power. When the wind speed is between 9m/s ~25m/s ,the blade will keep adjusting its position forth and backward slightly to let the angle X1 fluctuate a little bit but maintain at around 0°roughly, so as to stabilize its rated power. Within the wind speed of 25m/s ~ 50m/s ,when the wind has exceeded its rated speed , the wind will keep drawing the blade by the centrifugal force, so the angle X1 will continue to decrease and turn into a negative angle X1= - B°(PS: B°and - B°is not the same),under this negative angle, the rotation of blade will produce a resistance on the rotation of turbine blade to slow down the rotation and protect the wind turbine from over speed operation, the maximum RPM of the turbine will be no more than 380 RPM.

Technical Parameter

Rated powerW


Material of the blades

Fiberglass-Reinforced Plastics

Rated wind speed(m/s)


Speed regulation method

Adjustable-Pitch of blades


Startup wind speed(m/s)


Generator style

3-phase AC PM

Working wind speed(m/s)


Tower height (m)


Survived wind speed(m/s)


Stop method



Rated rotate speed (r/min)


Main machine weight(kg)


Rotor Diameter(m)


Working voltagev


Annual power generation